Prepreg System Selector Chart

Name Description Fibre Weights Dry Tg (Onset by E' DMA) Resin Density Typical Cure Cycle Typical Applications Features Typical Fibres Datasheet
TP736LT 80°C curing - High strength marine grade - Lloyds approved 30-300gsm 135˚C 1.200 8 hours at 80˚C or 2 hours at 120˚C Marine structures - hulls, decks, bulkheads Lloyds Register approved, 80˚C curable, high strength, low tack E-glass, HEC, IMC Datasheet Download - NTPT ThinPreg™ 736LT
TP513 120˚C curing with increased strength 15-150gsm 145˚C 1.223 2 hours at 120˚C or 1 hour at 135˚C All round system Versatile system - Lightweight prepreg Quartz, HSC, HEC, IMC, HMC / UHMC Datasheet Download - NTPT ThinPreg™ 513
TP402 135˚C curing high performance epoxy 15-150gsm 170˚C 1.225 2 hours at 135˚C or 2 hours at 160˚C Motorsports, automotive bodywork, Aerospace High Tg system, good strength - Ultra lightweight possible HEC, IMC, HMC, UHMC, PBO, Aramid Datasheet Download - NTPT ThinPreg™ 402
TP415 135˚C curing Rubber toughened version of 402 for sporting goods applications 15-150gsm 145˚C 1.207 2 hours at 135˚C Sports equipment Toughened system - Ultra lightweight prepreg HEC, IMC, HMC, UHMC, PBO, Aramid Datasheet Download - TP 415
TP135 135c curing PES toughened multi functional super strong resin system 30-150gsm 165˚C 1.300 4 hours at 135˚C or 2 hours at 180°C Motorsports, foils, highly loaded structures Medium Tg, high strength, high toughness, structural system - Lightweight prepreg HEC, IMC, HMC, UHMC, Quartz Datasheet Download - NTPT ThinPreg™ TP135
TP150SC 150c ultra low enathlpy very fast curing / snap cure system 15-150gsm 130˚C 1.190 2 mins at 150˚C Automotive, high volume production Very fast curing, UV stable, high strength E-Glass, HSC, HEC Datasheet Download - NTPT ThinPreg™ 150SC
TP190 180˚C curing PES toughened multi functional super high strength system 60-150gsm 210˚C 1.327 4 hours at 180˚C Aerospace structural parts High Tg, exceptional strength, toughness and compression after impact properties. Good hot wet performance. HEC, IMC, HMC Datasheet Download - TP 190
TP380CE 120˚C curing Cyanate Ester system used for space applications 15-150gsm 365˚C 1.305 120˚C for 6 hours Post cure at 260°C Space structures, super thin skin for honeycomb Low CTE, very high Tg capability - Ultra lightweight prepreg HEC, IMC, HMC, UHMC, Pitch Datasheet Download - NTPT ThinPreg™ 380CE
GF736 80˚C curing Adhesive film 150-400gsm with 25gsm scrim glass, 25-150gsm unsupported 110˚C 1.300 8 hours at 80˚C 1 hours at 120°C Honeycomb, certain core and steel bonding Toughened for impact resistance and peel strength. Controlled flow. Scim Glass 25gsm Datasheet Download - GF736

<< Drag Left To Reveal Table Cells